Please read the Terms and Conditions (Warranty Inclusive) (below). As stated in the Terms and Conditions, wire stripper machines are dangerous machines and must be used with caution. Do not hold onto the wire and turn the machine on at the same time. Avoid touching the blade at all times.
1 . Make sure the drill is turned off.
2 . Using the adjustment knob on the side, adjust the guides to the wire thickness. (wire must be able to slide in and out easily with minimum clearance)
3 . Slide the wire through the guide rails until the wire is just underneath the cutting blade.
4 . Using the cutter-adjustment knob on the top of the machine, turn the knob while your other hand is moving the wire back and forth along the guide rails until the cutter grabs the wire (you will feel resistance once the cutter grabs the wire – ensure that you do not need to pull on the wire to remove it from the guide rails).
5 . Let go of the wire (DO NOT HOLD ONTO THE WIRE). Turn the drill on, the blade will rotate, grip the wire and pull it through the machine.
5a . If the blade does not grip the wire and pull it through while the drill is on, turn off the drill and push the wire in further, then let go of the wire and turn on the drill.
6 . Once the wire is pulled through the machine, turn off the drill and remove the insulation from the copper wire.
Terms and Conditions
These Terms and Conditions are issued by 360 Degrees Limited Liability Company dba The Scrapper Economy ("The Scrapper Economy"). Please read the Terms and Conditions (the “Agreement”) carefully. The Agreement sets out the terms the BUYER accepts by purchasing a product(s) from The Scrapper Economy. If you do not agree with the agreement, please do not purchase a product(s) from The Scrapper Economy. The Scrapper Economy makes every effort to ensure that The Scrapper Economy products meet high quality standards.
SAFETY: Wire stripping machines can be very dangerous. These machines may cause injury or death if used carelessly or improperly. Please ensure Buyer reads the operation manual and follows the safety instructions at all times. Buyer of this product acknowledges that The Scrapper Economy and/or 360 Degrees Limited Liability Company ( shall in no way be responsible or liable to Buyer or any other party for any use or misuse of this item.
Buyer shall use safe operating procedures including but not limited to, the operational manual developed by TNT Tooling and Consulting Ltd. (“TNT”) and Buyer shall not modify the product. The Scrapper Economy shall not be liable for death, injuries to persons or property, or any damages arising from the use of any product purchased from The Scrapper Economy. Buyer acknowledges that Buyer has not and does not rely on The Scrapper Economy’s skill or judgment with regard to the safety and selection of the goods as fit or suitable for any particular purpose. It is Buyer’s responsibility to provide all the means that may be necessary to effectively protect Buyer, including but not limited to any persons Buyer permits to operate the product, from serious bodily injury which otherwise may result from the method of particular use, operation, set-up or maintenance of the equipment.
The Scrapper Economy warrants to the Buyer that this product is free from defects in materials and workmanship for the period of 30 days from the date the Buyer purchases the product. This warranty does not apply to damage arising directly or indirectly, to misuse, lack of maintenance, negligence or accidental, repairs or alterations made by Buyer or any party outside of TNT.
Should Buyer deem the product defective within 30 days of purchase, Buyer is responsible for notifying The Scrapper Economy with an explanation of defect via e-mail accompanied by pictures of the defect and proof of purchase. Upon instruction from The Scrapper Economy, Buyer will ship product to The Scrapper Economy. Upon receipt of the product, The Scrapper Economy will inspect the product to verify the defect. The Scrapper Economy will either have repaired or replace the product at The Scrapper Economy’s discretion. The Scrapper Economy will return repaired or replaced product at expense of The Scrapper Economy, however if The Scrapper Economy determines there is no defect, or the defect resulted from causes outside of the warranty, then Buyer must pay the shipping cost of returning the product to Buyer. This warranty shall not apply to any goods or parts which have been subject to improper use, installation, accident, negligence, alteration or misuse.
If Buyer does not purchase shipping insurance and the product sustains damage during shipping, Buyer will not be reimbursed for damages by The Scrapper Economy. If Buyer does purchase shipping insurance and the product is damaged during shipping, Buyer must notify the shipping company and follow their instructions, take pictures of the damaged item and notify The Scrapper Economy. The Scrapper Economy will make every effort to work with Buyer and shipping company to ensure that payment is received from shipping company and Buyer is provided a new product as quickly as possible.
The BUYER is responsible for any country-related fees (such as duty, brokerage or taxes)